Yes, you need the Dante Virtual Sound Card from Audinate to enable the ASIO layer between the Dante Ethernet protocol and the DAW. More info can be found here: Instantly set up your mixer with this free template: Let us know. Buy Audinate Dante Virtual Soundcard Software Token featuring Redeemable for Permanent DVS License, Up to 64 Bidirectional Audio Channels, Up to 32-Bit Audio, Sample Rates up to 192 kHz, Configurable Latency, Supports Dante Domain Manager, Compliant with Core Audio, ASIO, and WDM, macOS and Windows Compatible. Review Audinate DVS The Audinate Dante Virtual Soundcard software allows connection of a PC/Mac to a Dante audio network. This system allows the computer to record from and playback to the Dante network using most common DAW packages. Dante Virtual Soundcard uses the Ethernet port on the computer to communicate with the Dante network; no special hardware is required Dante Virtual Soundcard runs on Windows and macOS computers and provides an audio interface to applications for up to 64 Dante-enabled channels on the connected network. Dante Virtual Soundcard is used extensively in recording and live events, ingesting and delivering 100% lossless audio with minimal latency. Hello, I'm using Studio One in MAC and in Windows with Dante Virtual Sound Card as my audio device. Using this setup in MAC is no problem, I can record and playback just fine. The problem comes with windows. I set up my routing in Dante controller, no sign of any problem here. sqcH6. From a playback software (i.e.: VLC) (we're using Windows 10) out into the Dante Virtual Sound Card and from there to the desired 5.1 system. Hopefully, I've put this right so you get my point My question is: Is it possible to send an surround output signal into Dante? Because Dante needs to recognize the output as 6 distinct channels in order The Dante port on the Red is used to send and receive all Dante audio data. You still need to connect a standard ethernet port on the computer to the Dante network as well in order to configure devices and route between them using Dante Controller. Dante Virtual Soundcard (DVS) Hi. Not really sure to understand your scenario since I don't use DVS (Dante Virtual Soundcard). You could explore this setup using Voicemeeter Banana: In Windows Sound Control Panel - Playback tab - VoiceMeeter Input - Configure button - Set Speaker Setup to 5.1 Surround. This is where the game audio enters Voicemeeter Dante Certification Learn about Dante and promote your expertise with in-depth training offered both online and in-person. Live Training Dante AV Networking World and other training events are offered throughout the year. Video Tutorials Getting Started with Dante and Dante Controller 101 video series now available in addition to the Dante Certification videos. Online Training We Dante Controller does not work as a clock source. Although, a Dante network can't be used without that. That is where you do all the routing/patching, etc. Stereo Tools works rock-solid with Dante virtual sound card though. It is used for broadcasting like 2-3 years now. You can patch two audio sources to each instance of ST. One issue that I have never seen is DVS spontaneously turning off. If it's on, it stays on. Same here, Multiple instances of DVS on various levels of workstation. 3 of these installations reside on Tricaster 2 Elites. All systems are in an access and environmentally controlled Datacenter, kvm'd into the control suites.

how to use dante virtual soundcard